The standard lenses that were sold together with the Revue versions, all bear the designation Hexar without a manufacturer's name instead of the normal designation Konishiroku Hexanon. Fully illustrated with exploded views, component and circuit illustrations, complete repair instructions and factory parts list. The newer and much more readily available Konica lenses for the cannot be used on this camera. Attach the drawer cover, and then return the drawer for Tray2 to its original position. To change the number of copies to be made, remove the paper from the Bypass Tray and then reload it. The machine scans the document, then enters transmission standby mode. Film: 35mm film in cassette.
To change the settings of another group of fax numbers, repeat steps 3 through 8. Prices do not include shipping. Use the above address for a check, M. Laser Safety Label A laser safety label is attached to the outside of the machine as shown below. Specify the fax number of the recipient.
Remove the cover of optional Tray2, and then pull out the drawer. Gently lower the Auto Document Feeder. Dialing A fax number is being dialed. The position of the accessory shoe, that was available as a separate accessory, is a bit strange. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the.
Apart from the mat screen image, there are no informations available in the viewfinder. To program another speed dial number, repeat steps 3 through 11. Full Size This setting makes a copy the same size as the original × 1. Clearing a Paper Misfeed in the Machine Open the Front Cover. Specify the desired copy or fax settings. If one-touch dial keys or speed dial numbers are programmed with F codes, the appropriate F code can quickly be transmitted.
Original Glass Place your original on this glass to allow the machine to scan it. Grab both sides of the paper, and then pull it out upward. When clearing a paper misfeed or replacing the Drum Cartridge or Toner Cartridge Note Adjust the Tray Extension and Paper Stopper to fit the size of the paper. Attach the tray removed in step 2. Never use mild household detergent or glass cleaner to clean the Control Panel. There are No repair instructions. An unpleasant odor may, however, be detected in poorly ventilated rooms during extensive machine operations.
Parts listing, exploded views, disassembly and assembly instructions. Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. The document is automatically sent at the specified time. However, they were also built by Konica and are the same lenses as the respective Hexanons sold elsewhere. The timer can be set between 1 min and 240 min. Highly detailed repair instructions, illustrated, including exploded views, schematics, wiring diagrams and extensive numbered parts list.
For details on their operation, refer to the pages indicated. There is a problem with the Contact the recipient. Number of copies Displays the currently specified number of copy pages and number of copy sets. This page may not be sold or distributed without the expressed permission of the producer. Specify the desired copy or fax settings. Open, then close the Front Cover.
A slight turn of the knob may be needed for it to be 4. Note Do not push in the Imaging Cartridge with excessive force if the cartridge is not correctly aligned on the rail, otherwise the units may be damaged. This will help me to continue to host this site, buy new manuals, and pay their shipping costs. The Imaging Cartridge is constructed of both the Drum Cartridge and the Toner Cartridge set into place. A screen appears, allowing you to select the monitoring volume. After the transmission result report is printed, the main screen appears. Automatic paper supply section Clearing a Paper Misfeed in Auto Document Feeder Open the Document Feeder Cover.